Crestron electronic DMTH4 quick start USB Driver Installation Windows

DMTH4

USB Driver Installation (Windows 2000)

First Time Installation

When a LecNet2™ device is connected to a comptuer system running the Windows® 2000 operating system for the very first time, the Windows Found New Hard- ware Wizard automatically opens. (Dm1624 shown for illustrative purposes only.)

Use the following procedure to install the LecNet2™ USB driver using the Wizard.

1.Connect a cable between the DM processor USB port and the computer system. Place the LecNet2™ Installation Disk in the computer system’s CD-ROM drive and click Next> to con- tinue.

2.Select "Search for a suitable driver for my device (recommended)" and click Next> to continue.

3.Check "CD-ROM drives" then click Next> to search the LecNet2™ CD for the USB driver.

4.When it is found, the LecNet2™ device name will be displayed. Click Next> to install the driver.

5.When the driver installation is complete, the final page of the Wizard appears. Click Finish. It is now possible to connect to the LecNet2™ device.

12 LECTROSONICS, INC.