WAILEATM 
CANOPY INSTALLATION
Step 2. Thread the wires from the ceiling through the opening in the canopy. Attach the canopy to the crossbar mounting bracket with three of the
Using the screwdriver, tighten the screw firmly by hand only.
Note: On sloped ceilings, align the canopy opening toward the top or room peak.
CROSSBAR MOUNTING
BRACKET INSTALLED
CANOPY
CANOPY LOCK 
WASHERS
CANOPY
SCREWS
HANGING THE FAN
Step 3. To hang the fan body in the canopy, hold the fan body firmly and in- sert the ball into the canopy opening. Check that no wires were pinched. Ro- tate the fan body until the slot in the ball fits into the pin opposite the canopy opening.
Note: The fan weight is 17 lbs.
CAPPED
BLUE
BALL
WIRE.SLOT
PIN
CANOPY ELECTRICAL CONNECTIONS
Step 4a. Attach the fan wires to the ceiling fixture outlet box wiring by placing the bare ends of the wires side by side and then securing with a wire nut. Test that the connection is secure by pulling on the wire nut. Connect in this order:
Step 4b. Pull Chain Connections
•GREEN leads from mounting plate and fan to GROUND con- ductor of power source. Secure with wire nut.
•WHITE wire from fan to white NEUTRAL wire in ceiling fixture outlet box. Secure with wire nut.
•BLUE wire and BLACK power wire from fan to BLACK power wire in ceiling outlet box. Secure with wire nut.
2 BLACK WIRES
2 WHITE WIRES 
3 GREEN WIRES
WIRE NUT
5
