WAILEATM
INSTALL SWITCH HOUSING
Step 15. Install 2 of the 3 switch housing screws onto the fan adapter plate, leaving 1⁄8" threads visible. Feed the wire connec- tor from the fan through the center of the switch housing.
Align the 2 screws on the adapter plate with the keyhole slots of the switch housing. Raise the switch housing, pulling on the fan wire connector to assure no wires get pinched.
2 SWITCH
HOUSING SCREWS
Turn the switch housing counter clockwise, engaging the 2 screws. Install the third screw and tighten all 3 screws.
SWITCH
HOUSING SCREW
SWITCH
HOUSING
CONNECT WIRES
Step 16. Plug the wire connector for the fan into the wire connector for the switch housing. Assure that the clip from the fan connector engages the notch on the switch housing connector.
CLIPNOTCH
INSTALL SWITCH HOUSING CAP SCREWS
Step 17. If you are installing a light fix- ture, please refer to the
If no light fixture is being installed, care- fully push the wires and components back into the switch housing.
NOTE: The black wiring boxes have double sided tape. Use the tape to secure the boxes to the top of the switch housing.
Align the guiding pegs of the cap to the
8