HANGING THE FAN
Step 5. To hang the fan body in the |
|
canopy, hold the fan body firmly and insert |
|
the ball into the canopy opening. Check |
|
that no wires were pinched. Rotate the fan |
|
body until the slot in the ball fits into the | ball |
pin opposite the canopy opening. | |
NOTE: The fan weight is 50 pounds. | slot |
CANOPY ELECTRICAL CONNECTIONS
pin
Step 6. Attach the fan wires to the ceil- ing fixture outlet box wiring by twisting the bare ends of the wires together and then securing with a wire nut.
Connect in this order:
•GREEN leads from mounting plate and fan to GROUND conductor of power source. Secure with wire nut.
•WHITE wire from fan to white NEU- TRAL wire in ceiling fixture outlet box. Secure with wire nut.
•BLACK wire from fan to black (or red) POWER wire in ceiling fixture outlet box. Secure with wire nut.
BLACK wires
(2)
WHITE WIRES
(2)
GREEN WIRES
(3)
wire nut
CANOPY HATCH INSTALLATION
Step 7. Tuck the wires into the canopy with the wire nuts pointed upwards, so that the WHITE and BLACK wires are on opposite sides of the canopy and all wires are clear of the canopy opening.
Step 8. Install canopy hatch with the last canopy screw and lock washer. To do this, tilt the fan body away from the hatch opening.
Tighten the screws firmly by hand only.
Step 9. Straighten the fan, then check to ensure that there is no movement be- tween the canopy and ceiling or
Note: Write down the Serial Number and the model num- ber for future reference from the top of the fan.
canopy
hatch
lock washer 
canopy
screw
tilt the
fan to
install
last
canopy
screw
6
