BRESCIA (GALLERY EDITION)
HANGING THE FAN
Step 3. To hang the fan body in the canopy, hold the fan body firmly and in- sert the ball into the canopy opening. Check that no wires were pinched. Ro- tate the fan body until the slot in the ball fits into the pin opposite the canopy opening.
Fan Hanging Weight
is 26 lbs
BALL
SLOT
PIN
CANOPY ELECTRICAL CONNECTIONS
Step 4a. Attach the fan wires to the ceiling fixture outlet box wiring by placing the bare ends of the wires side by side and then securing with a wire nut. Test that the connection is secure by pulling on the wire nut. Connect in this order:
Step 4b.
•GREEN leads from mounting plate and fan to GROUND con- ductor of power source. Secure with wire nut.
•WHITE wire from fan to white NEUTRAL wire in ceiling fixture outlet box. Secure with wire nut.
•BLUE wire and BLACK power wire from fan to BLACK power wire in ceiling outlet box. Secure with wire nut.
WIRE NUT
2 BLACK WIRES
2 WHITE WIRES 
3 GREEN WIRES
CANOPY HATCH INSTALLATION
Step 5. Tuck the wires into the canopy with the wire nuts pointed upwards, so that the WHITE and BLACK wires are on opposite sides of the canopy and all wires are clear of the canopy opening.
Step 6. Install canopy hatch with the last canopy screw and lock washer. To do this, tilt the fan body away from the hatch opening.
Using the screwdriver, tighten the screws firmly by hand only.
Step 7. Straighten the fan, then check to ensure that there is no movement be- tween the canopy and ceiling or
CANOPY
HATCH
LOCK
WASHER
CANOPY
SCREW
Note: Write down the Serial Number and the model number for future reference.
TILT THE
FAN TO
INSTALL
LAST
CANOPY
SCREW
5
