Casablanca Fan Company Casablanca Brescia Gallery Edition owner manual Remove Shipping Blocks

BRESCIA (GALLERY EDITION)

REMOVE SHIPPING BLOCKS

Step 10. On the flywheel remove the four shipping blocks by unscrewing the screws. Discard the shipping blocks and shipping block screws.

SHIPPING

BLOCKS

BLADE/BLADE HOLDER INSTALLATION

Step 11. Using the screws from the pack, attach each blade/blade holder assembly to the motor.

Using the screwdriver, tighten securely by hand only.

	BLADE
Your Brescia fan is equipped with a fly-	HOLDER
wheel that allows for both 4 and 5	SCREWS
blade installation. The screw holes sur-
rounded by squares are for 4 blade
installation, while the screw holes in
circles are for 5 blade installation as
shown above.

ATTACH SWITCH HOUSING SCREWS

NOTE: IF YOU ARE NOT INSTALLING THE LIGHT KIT, PLEASE SEE PAGE 10.

Step 12. Attach the two (2) 5-32 X 9/32″ switch housing screws removed in Step 8 to fan motor as shown, leaving 1⁄8" space for the switch housing installation.

SWITCH

HOUSING SCREWS

(FROM STEP 8)

PREPARE SWITCH HOUSING ASSEMBLY

Step 13. Locate the switch housing/cap assembly and remove the two 8-32 X 3/8″ screws holding the cap onto the switch housing. Set the cup aside in a safe lo- cation, you will need it if you ever decide to uninstall the light fixture.

Note: Save these two screws–they will be used in Step 16!

SWITCH

HOUSING

CAP

CAP SCREW 8-32 X 3/8″

(2)

7