Casablanca Fan Company Metropolitan Comforttouch Reverse Feature, Comforttouch Auto-Speed Feature

COMFORT•TOUCH ♦ REVERSE FEATURE

Pressing the REVERSE button will change the direction of rotation. An audio tone signals the beginning of the reverse sequence and you will see the airflow direction arrow changing. The fan gradually slows to a stop, then reverses direction.

Note: This function does not operate if the fan is not running.

REVERSE

COMFORT•TOUCH ♦AUTO-SPEED FEATURE

In the Auto Speed mode, fan speed changes in response to changes in room tempera- ture. Push the AUTO button to start. The words 'AUTO SPEED' show on the display. Set the fan speed to the speed at which you are most comfortable. Once set, the fan will increase or decrease by one speed for each 1.5° F increase or decrease in temperature. If temperature decreases enough to turn the fan OFF, the Auto Speed indicator will flash slowly to remind you that the fan will turn on when the temperature increases.

Note: The temperature displayed is from an electronic thermometer built into the remote control that reads room temperature. It is not a thermostat that controls the room temperature.

To cancel Auto Speed, simply push the AUTO button again. Selecting WINTER also cancels Auto Speed.

AUTO SPEED

Temperature Accuracy ± 3° F

COMFORT•TOUCH ♦SAVER FEATURE

The Saver mode will automatically turn lights off 1 hour after the
lights are turned on. Press the SAVER button and 'SAVER' will appear in
the display. An audio tone will warn you 20 seconds before the pro-
gram is going to turn the lights off. Press the SAVER button again to
cancel.	SAVER

COMFORT•TOUCH ♦ WINTER FEATURE

The Winter mode provides draft-free recirculation of heated air. Press
WINTER to activate, and the word 'WINTER' is indicated. This puts the
fan in the upward airflow direction at the fan's lowest speed. Every ten
minutes the fan will increase to speed 3 for ten seconds before return-
ing to the lowest speed.
Pressing any button on the remote will cancel the	WINTER
'Winter' mode; except using the light functions.

COMFORT•TOUCH ♦SECURITY FEATURE

Pressing the SECURITY button will start the Security lighting pro- gram. The controller beeps and indicates 'SECURITY'. The light will automatically turn ON and OFF in a seemingly random man- ner over an eight and a quarter hour programmed cycle that is designed to give the home a "lived-in" look.

Regardless of the light setting when switching to the Security mode (lights on or off, dim or bright), the lights will increase to high brightness and then begin the Security cycle. This cycle is then repeated continuously until cancelled by pressing the

SECURITY button.

At any time during the Security mode you may adjust the fan speed, reverse the direction, operate in Auto Speed or Winter, use Saver or run the Test mode without affecting Security mode.

You may still turn the light ON and OFF (or OFF and ON) manu- ally for temporary lighting, but the light will continue to operate automatically at its programmed times.

6

5 4 3 2 1

SECURITY

		AUTO		SECURITY	REVERSE
		SAVER		TEST	WINTER
			Replace batteries when “Lo” is displayed
			AUTO-SPEED:Thermostatic fan speed control
			SECURITY: Lights ON and OFF automatically
			REVERSE: Change airflow up or down
			SAVER: Lights turn OFF after 1 hour
	SECURITY		TEST: Tests all fan and light functions
			WINTER: Draft-free heat recirculation
	SECURITY MODE CYCLE
1.	On for 30 minutes (80% bright)		5. On for 60 minutes (100% bright)
2.	Off for 30 minutes		6. Off for 120 minutes
3.	On for 120 minutes (50% bright)		7. On for 15 minutes (20% bright)
4.	Off for 60 minutes		8. Off for 60 minutes

14