METROPOLITAN™ |
HANGING THE FAN
Step 3. To hang the fan body in the canopy, hold the fan body firmly and in- sert the nylon ball into the canopy opening. Check that no wires were pinched. Rotate the fan body until the slot in the nylon ball fits into the pin opposite the canopy opening.
BALL
SLOT
PIN
CANOPY ELECTRICAL CONNECTIONS
Step 4. Attach the fan wires to the ceiling fixture outlet box wiring by twisting the bare ends of the wires together and then securing with a wire nut. Test that the connection is secure by pulling on the wire nut. Connect in this order:
Electrical Connections
•GREEN leads from mounting plate and fan to GROUND conductor of power source. Secure with wire nut.
•WHITE wire from fan to white NEUTRAL wire in ceil- ing fixture outlet box. Secure with wire nut.
•BLACK power wire from fan to BLACK power wire in ceiling outlet box. Secure with wire nut.
2 BLACK WIRES
2 WHITE WIRES 
3 GREEN WIRES
WIRE NUT
CANOPY HATCH INSTALLATION
Step 5. Tuck the wires into the canopy with the wire nuts pointed upwards, so that the WHITE and BLACK wires are on opposite sides of the canopy and all wires are clear of the canopy opening.
Step 6. Install canopy hatch with the last canopy screw and lock washer. To do this, tilt the fan body away from the hatch opening.
Tighten the screws firmly by hand only,
Step 7. Straighten the fan, then check to ensure that there is no movement be- tween the canopy and ceiling or
CANOPY
HATCH
LOCK
WASHER 
CANOPY
SCREW
Note: Write down the Serial Number and the model number for future reference.
TILT THE
FAN TO
INSTALL
LAST
CANOPY
SCREW
5
