Casablanca Fan Company Metropolitan manual Crossbar Mounting Bracket Installation, Canopy Hardware

METROPOLITAN™

CROSSBAR MOUNTING BRACKET INSTALLATION

Proceed with installation as follows:

Step 1. Route the wires from the ceiling outlet box through the crossbar mounting bracket center hole. Attach the bracket, with ground wire and ridges down, to the ‘Approved For Ceil- ing Fan Installation’ ceiling fixture outlet box with the outlet box mounting hardware.

Tighten the screws firmly, being careful not to bend the bracket by over tightening.

CAUTION: To reduce the risk of personal injury, use only the mounting hardware provided with the approved outlet box to install the crossbar mounting bracket.

CEILING FAN

APPROVED

WIRING BOX

CEILING

WIRING

CROSSBAR

MOUNTING

BRACKET

FLAT

WASHER

APPROVED

OUTLET BOX

HARDWARE

RIDGE

SIDE

DOWN

GREEN

GROUND

WIRE

CANOPY HARDWARE

CANOPY SCREW (4)

CANOPY	CANOPY LOCK WASHER (4)
HATCH	CANOPY

CANOPY INSTALLATION

Step 2. Attach the canopy to the crossbar mount- ing bracket with three of the 8-32 x 2 1/4″ long canopy screws and canopy lock washers. Hand tighten until snug against the ceiling.

Note: On sloped ceilings, align the canopy opening towards the top or room peak.

CROSSBAR MOUNTING BRACKET INSTALLED

CANOPY

CANOPY LOCK

WASHERS

CANOPY

SCREWS

4