USER’S GUIDE 2456
Telememo
Memory number
Name
Telephone number
Telememo lets you store up to 20 records, each containing name and telephone number data. Records are automatically sorted based on the characters of the name. You can recall records by scrolling through them on the display.
•See “Character List” at the back of this manual for details on how the watch sorts records.
•Your watch comes preset with three Telememo records with the names “FAMILY,” “HOME,” and “OFFICE,” without any phone numbers. You can change or delete these records if you want.
•All of the operations in this section are performed in
the Telememo Mode, which you enter by pressing C (page
| ▲ |
| Target |
|
|
| Month – Day |
•In the Day Counter Mode, use B and D to cycle through the Day Counter number screens as shown below.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| DC1 |
|
|
| DC2 |
|
|
| DC3 |
|
|
| DC4 |
|
|
| DC5 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
•A Day Counter Number screen remains on the display for about two seconds,
after which it is replaced by the corresponding Target Date screen. Pressing A while a Target Date screen is on the display switches to the corresponding Day Counter Number screen for about two seconds.
•The day counter value has a plus sign (+) in front of it when the corresponding target date comes after the current date, or a minus sign
•Your watch comes preset with the following Day Counter text settings. You can use these as they are or change them to something else, if you want. DC1: 21C (21ST century)
DC2: PAYDAY
DC3: BIRTHDAY
1. In the Day Counter Mode, use B and D to scroll through the Day Counter Number screens until the one you want is on the display.
2. Hold down A until the flashing cursor appears on
| the display, which indicates the setting screen. | |
| • | Holding down L for about two seconds at this |
|
| time clears the text (if there is any already input) |
|
| and sets the current Timekeeping Mode date as |
Cursor | the target date. | |
3. Press C to move the flashing in the sequence shown below to select other settings.
Text |
|
| Year |
|
| Month |
|
| Day |
|
|
| |||||||
|
|
|
|
|
|
|
|
|
|
•There are eight spaces in the text, so you have to press C eight times to move to the Year setting.
•When the Year setting is selected, the cursor changes for a
4.When the setting you want to change is selected, use B and D to change it.
•Selecting the text causes the text input cursor to appear.
•When inputting text, use B and D to cycle through characters at the current cursor location, and C to move the cursor to the right. See “Inputting Text” on page
•While the year, month, or day setting is flashing, use D (+) and B
•You can set a target date in the range of January 1, 1940 to December 31, 2039.
5.Press A to exit the setting screen.
Note
•Use the above procedure to edit Day Counter records, too.
World Time
Timekeeping Mode time | World Time shows the current time in 28 cities (29 | |||||
City code |
| time zones) around the world. | ||||
| • | For full information on city codes, see the “City | ||||
|
|
|
|
| ||
|
|
|
|
| • | Code Table” at the back of this manual. |
|
|
|
|
| All of the operations in this section are performed in | |
|
|
|
|
|
| the World Time Mode, which you enter by pressing |
|
|
|
|
|
| C (page |
|
|
|
|
| To view the time in another city code | |
|
|
|
|
| ||
Current time in the | While in the World Time Mode, press D to scroll | |||||
selected city code | forward through the city codes (time zones) and B | |||||
to scroll back.
•If the current time shown for a city is wrong, check your Timekeeping Mode time and Home City settings and make the necessary changes.
To toggle a city code time between standard time and Daylight Saving Time
1. In the World Time Mode, use B and D to display the city code (time zone) whose standard time/ Daylight Saving Time setting you want to change. 2. Hold down A for about two seconds to toggle
Daylight Saving Time (DST displayed) and
standard time (DST not displayed).
• The “DST” indicator is on the display whenever you display a city code for which Daylight Saving Time is turned on.
• Note that the DST/Standard Time setting affects only the currently displayed city code. Other city codes are not affected.
• Daylight Saving Time (DST) advances the time setting by one hour from Standard Time. Remember that the not all countries or even local areas use Daylight Saving Time.
To create a new Telememo record
1. In the Telememo Mode, press B or D until a record showing the name “NEW” (indicating the new record input screen) appears.
• If the message “FULL” appears on the display, it means that memory is full. To store another record, you will first have to delete some of the records stored in memory.
2.Hold down A until the flashing cursor ( 
) appears on the display, which indicates the setting screen.
3.Input a name.
•When inputting the name, use B and D to cycle through characters at the current cursor location, and C to move the cursor to the right. See “Inputting Text” on page
•You can input up to eight characters for the name.
-
4. After you input the name, press C as many times as necessary to display the number input screen.
• You can input up to eight characters for the name. When the cursor is located at the eighth space of the name, moving the cursor to the right causes it to jump to the first digit of the number. When the cursor is at the 12th digit of the number, moving it to the right (by pressing C) causes it to jump to the first character in the name.
5.Input a telephone number.
•Use B and D to change the character (hyphen, number, or space) at the cursor position. The character changes in the following sequence.
Press D. |
|
|
|
|
|
|
|
|
|
|
|
|
|
Press B. |
|
| – |
|
|
| 0 to 9 |
|
|
| (space) |
|
|
|
|
|
|
|
|
| |||||||
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
6.When the character you want is at the cursor position, press C to move the cursor to the right.
7.Repeat steps 5 and 6 until you complete number input.
•You can input up to 12 digits for the number.
•The number initially contains all hyphens. You can leave the hyphens or replace them with numbers or spaces.
8.Press A to store your data and return to the Telememo record screen (without the cursor).
•When you press A, the message “SORT” appears on the display for a few seconds. After the sort operation is complete, the watch returns to the Telememo record screen (without the cursor).
To recall Telememo records
In the Telememo Mode, use D (+) and B
•Only the memory number and name of each Telememo record appear on the display as you scroll through Telememo records. If you leave the memory number/name screen on the display for about two seconds, it changes to the phone number screen.
•Pressing A while the phone number screen is on the display switches to the memory number/name screen for about two seconds.
To edit a Telememo record
1.In the Telememo Mode, scroll through the records and display the one you want to edit.
2.Hold down A until the flashing cursor appears on the display.
3.Use C to move the flashing to the character you want to change.
4.Use B and D to change the character.
5.After making the changes that you want, press A to store them and return to the Telememo record screen.
To delete a Telememo record
1.In the Telememo Mode, scroll through the records and display the one you want to delete.
2.Hold down A until the flashing cursor appears on the display.
3.Hold down L until the message “CLEAR” appears on the display.
• At this time the cursor appears on the display, ready for input.
4.Input data or press A to return to the Telememo record screen.
3
