Operation Guide 5113 5213
To test the alarm
In the Alarm Mode, hold down A to sound the alarm tone.
To turn an alarm and the Hourly Time Signal on and off
1. | In the Alarm Mode, use A and C to select an alarm or the Hourly Time Signal. |
2. | When the alarm or the Hourly Time Signal you want is selected, press B to toggle it between (ON) and |
| off (OFF). |
Checking the Current Time in a Different Time Zone
You can use the World Time Mode to view the current time in one of 29 time zones (29 cities) around the globe. The city that is currently selected in the World Time Mode is called the “World Time City”.
•You also can swap the current World Time City and Home Time City in the World Time Mode. (page
• The alarm on indicator (when any alarm is on) and the hourly time signal on indicator (when the |
hourly time signal is on) are shown on the digital display in all modes. |
Alarm on indicator | Hourly time signal | |
on indicator | ||
|
To stop the alarm
Press any button.
Currently selected World Time City
Current time in the currently selected World Time City
To enter the World Time Mode
Use D to select the World Time Mode (WT) as shown on page
•WT appears on the digital display and the second hand moves to the city code of the currently selected World Time City.
To view the time in another time zone
In the World Time Mode, use A to move the second hand to a city code in the zone whose time you want to view.
•Keep pressing A until the second hand is pointing to the city code you want.
•The current time in time zone of the currently selected city code is shown in the digital display.
|
|
To specify standard time or daylight saving time (DST) for a city
1.In the World Time Mode, use A to move the second hand to the city code whose standard time/daylight saving time setting you want to
change.
• Keep pressing A until the second hand is pointing to the city code you want.
2. Hold down E until each of the following steps occurs.
• Hold appears on the digital display. ➝ Hold disappears.
• This toggles the city code you selected in step 1 between Daylight Saving Time (dSt indicator displayed) and standard time (dSt indicator not displayed).
DST indicator | • Using the World Time Mode to change the DST setting of the city | |
code that is selected as your Home City also will change the | ||
| ||
| Timekeeping Mode time DST setting. | |
| • Note that you cannot switch between standard time/daylight saving | |
| time (DST) while UTC is selected as the World Time City. | |
| • The standard time/daylight saving time (DST) setting affects only the | |
| currently selected time zone. Other time zones are not affected. |
Swapping the Home City and World Time City
You can use the procedure below to swap your Home City with your World Time City. This function comes in handy for those who often travel between two different time zones.
The following example shows what happens when the Home City and World Time City are swapped while the Home City originally is TOKYO (TYO) and the World Time City is NEW YORK (NYC).
| Home City | World Time City |
| Tokyo | New York |
Before swapping | 10:08 p.m. | 9:08 a.m. |
| (Standard time) | (Daylight saving time) |
| New York | Tokyo |
After swapping | 9:08 a.m. | 10:08 p.m. |
| (Daylight saving time) | (Standard time) |
To swap your Home City and World Time City
1.In the World Time Mode, use A to select the city code you want to make your World Time City.
•Keep pressing A until the second hand is pointing to the city code you want.
•In this example, you would move the second hand to NEW YORK (NYC) in order to select New York as the World Time City.
2.Hold down C until each of the following steps occurs.
•Hold () appears on the digital display. ➝ Hold () disappears.
•This will cause the World Time City (NEW YORK / NYC in this example) you selected in step 1 of this procedure your new Home City, and your previously selected Home City (TOKYO / TYO in this example) will become your new World Time City. The digital display and hands will indicate the current time in your new World Time City (TOKYO / TYO in this example).
Adjusting Home Positions |
| Illumination |
Strong magnetism or impact can cause the hands of the watch to be off. When this happens, you can adjust the hand home positions to ensure correct timekeeping.
•Hand home position adjustment is not necessary as long as the hands are indicating time correctly.
To adjust home positions
1. Enter the Hand Home Position Adjustment Mode (page
• The digital display will show HS, followed by the current Timekeeping Mode time. You can use the digital display to check if the hand positions are correct and to confirm whether the analog time indication matches the digital time.
2. Hold down E until each of the following steps occurs.
• Hold SET appears on the digital display. ➝ SEC 00 flashes.
• The second hand should move to 12 o’clock at this time. If it doesn’t, use A (+) to move the second hand so it aligns with 12 o’clock.
3. After the second hand is aligned correctly, press D.
• The hour and minute hands should move to 12 o’clock. If they don’t, use A (+) and C
• Pressing D here returns to the second hand home position adjustment in step 2.
4. After adjusting the hour hand and minute hand home positions, press E.
The face of the watch is illuminated for easy reading in the dark.
The watch’s auto light switch turns on illumination automatically when you angle the watch towards your face.
•The auto light switch must be turned on (page
To turn on illumination manually
Press L in any mode to turn on illumination.
•You can use the procedure below to select either one second or three seconds as the illumination duration. When you press L, illumination will remain on for about one second or three seconds, depending on the current illumination duration setting.
•The above operation turns on illumination regardless of the current auto light switch setting.
•Illumination cannot be used in a sensor mode, or while a compass operation is in progress.
|
|
To change the illumination duration
1. In the Timekeeping Mode, hold down E until each of the following steps occurs.
• Hold SET appears on the digital display. ➝ HT flashes. ➝ Second hand points to the current Home City code.
2. Use D to cycle through the settings on the digital display until the current illumination duration (LT1 or LT3) is shown.
• See step 3 under “To change the current time and date settings” (page
3.Press A to toggle the illumination duration between three seconds (LT3 displayed) and one second (LT1 displayed).
4.After all the settings are the way you want, press E to exit the setting screen.
About the Auto Light Switch
Turning on the auto light switch causes illumination to turn on, |
|
whenever you position your wrist as described below in any mode. | More than |
Moving the watch to a position that is parallel to the ground and | 40° |
then tilting it towards you more than 40 degrees causes |
|
illumination to turn on. | Wear the watch on the |
| |
| outside of your wrist |
Warning!
•Always make sure you are in a safe place whenever you are reading the display of the watch using the auto light switch. Be especially careful when running or engaged in any other activity that can result in accident or injury. Also take care that sudden illumination by the auto light switch does not startle or distract others around you.
•When you are wearing the watch, make sure that its auto light switch is turned off before riding on a bicycle or operating a motorcycle or any other motor vehicle. Sudden, unintended operation of the auto light switch can create a distraction, which can result in a traffic accident and serious personal injury.
Note
•This watch features a “Full Auto LED Light”, so the auto light switch operates only when available light is below a certain level. Illumination does not turn on under bright light.
•The auto light switch is always disabled, regardless of its on/off setting, when any one of the following
conditions exists.
While an alarm is sounding During sensor measurement
While a bearing sensor calibration operation is being performed in the Compass Mode While a hand home position adjustment operation is in progress