Casio 5213 Timekeeping, Conﬁguring Home City Settings, Conﬁguring Current Time and Date Settings, dSt, OFF, OFF, dSt, OFF, 12H, 24H, Mode, Mode, HOME, Note, Display

Operation Guide 5113 5213

Selecting a Mode

•The illustration below shows which buttons you need to press to navigate between modes.

•To return to the Timekeeping Mode from any other mode, hold down D for about two seconds.

•In any mode, press L to illuminate the display.

Timekeeping Mode

Countdown		Data Recall
Timer Mode	Stopwatch Mode	Mode

	World Time	Hand Home Position
Alarm Mode	Mode	Adjustment Mode

E-16

•You can use buttons A, B, and C to enter a sensor mode directly from the Timekeeping Mode or from another sensor mode. To enter a sensor mode from the Data Recall, Stopwatch, Countdown Timer, Alarm, World Time, or Hand Home Position Adjustment Mode, ﬁrst enter the Timekeeping Mode and then press the applicable button.

•The hour and minute hands indicate the current time in all modes. In the Timekeeping, Data Recall, Stopwatch, Countdown Timer, and Alarm modes, the second hand indicates the current (Timekeeping Mode) second. The second hand performs other operations in the other modes.

Sensor Modes

Compass Mode	Barometer/	Altimeter Mode
Compass Mode	Thermometer Mode	Altimeter Mode

E-17

General Functions (All Modes)

The functions and operations described in this section can be used in all of the modes.

Auto Return Features

•The watch returns to the Timekeeping Mode automatically if you do not perform any button operation for two or three minutes in the Data Recall, Alarm, or Hand Home Position Adjustment Mode.

•If you leave a screen with ﬂashing digits on the digital display for two or three minutes without performing any operation, the watch exits the setting screen automatically.

Initial Screens

When you enter the Data Recall, World Time, Alarm, Compass, or Barometer/Thermometer Mode, the data you were viewing when you last exited the mode appears ﬁrst.

Scrolling

The A and C buttons are used to scroll through settings on the digital display while a setting screen is displayed, and to move the hands of the watch manually. In most cases, holding down either of these buttons will perform its operation at high speed.

Timekeeping

Use the Timekeeping Mode (HOME) to set and view the current time and date.

•In the Timekeeping Mode, press E to toggle the digital display between the day of the week and the barometric pressure graph.

Day of the WeekBarometric Pressure Graph

Second hand

Hour

hand

Minute hand

Month Day	Barometric
	pressure graph

Month Day

Day of week

E-18	E-19

Conﬁguring Home City Settings

There are two Home City settings: selecting the Home City, and specifying either standard time or daylight saving time (DST).

5.After all the settings are the way you want, press E to return to the Timekeeping Mode.

•The hands of the watch will move the current time in the zone where the city code you selected as your Home City is located. Do not perform any operation on the watch while the hands are moving.

•If Daylight Saving Time is selected, the dSt indicator will be on the digital display.

PM indicator

Hour :		Second
Minutes	City code	hand
	City code

DST indicator

To conﬁgure Home City settings

1.In the Timekeeping Mode, hold down E until each of the following steps occurs.

•Hold SET appears on the digital display. ➝ HT ﬂashes. ➝ Second hand points to the current Home City code.

•For information about city codes, see the “City Code Table” at the back of this manual.

2.To change the Home City code setting, press A to move the second hand clockwise.

•Keep pressing A until the second hand is pointing to the city code you want to select as your Home City.

•The current time in the time zone of the currently selected city code is shown on the digital display.

3.Press D. This will display the DST setting screen on the digital display.

4.Press A to toggle the DST setting between Daylight Saving Time (On) and standard time (OFF).

•Note that you cannot switch between standard time and daylight saving time (DST) while UTC is selected as your Home City.

Note

•After you specify a city code, the watch will use UTC* offsets in the World Time Mode to calculate the current time for other time zones based on the current time in your Home City.

* Coordinated Universal Time, the world-wide scientiﬁc standard of timekeeping. The reference point for UTC is Greenwich, England.

To change the Daylight Saving Time (summer time) setting

1.		In the Timekeeping Mode, hold down E until each of the following
DST indicator		steps occurs.
		• Hold SET appears on the digital display. ➝ HT ﬂashes. ➝ Second
		hand points to the current Home City code.
2.		Press D. This will display the DST setting screen on the digital
		display.
		Press A to toggle the DST setting between Daylight Saving Time (On)
	3.
	3.
		and standard time (OFF).

4.After all the settings are the way you want, press E to exit the setting screen.

• The dSt indicator indicates that Daylight Saving Time is selected.

E-20	E-21

Conﬁguring Current Time and Date Settings

You can use the procedure below to adjust the Timekeeping Mode time and date settings if they are off.

3. Press D to cycle through the available settings on the digital display in the sequence shown below.

City Code

DST

12/24-Hour

Seconds

Hour

Minute

Year

Format

To change the current time and date settings

PM indicator

Hour :	Second
Minutes	hand
	City code

1.In the Timekeeping Mode, hold down E until each of the following steps occurs.

•Hold SET appears on the digital display. ➝ HT ﬂashes. ➝ Second hand points to the current Home City code.

2.Use A to select the city code you want to select as your Home City.

•Each press of A moves the second hand clockwise. Keep pressing A until the second hand is pointed at the city code you want to select.

•Select your Home City code before changing any other setting.

•For full information about city codes, see the “City Code Table” at the back of this manual.

Thermometer/Barometer/

Auto Light

Illumination

Button Operation

Day

Month

Altitude unit

On/Off

Duration

Tone On/Off

•The following steps explain how to conﬁgure timekeeping settings only.

4.When the timekeeping setting you want to change is displayed, use A and/or C to change it as described below.

Display	To do this:	Do this:
	Change the city code	Press A.

	Toggle between Daylight Saving Time (On) and	Press A.
	Standard Time (OFF).	Press A.
	Standard Time (OFF).

	Toggle between 12-hour (12H) and 24-hour (24H)	Press A.
	timekeeping.	Press A.
	timekeeping.
	Reset the seconds to 00	Press A.

	Change the hour or minute	Use A (+) and C (–).

E-22

E-23