Casio AP-24 Adjusting the Volume of Layered, Tones, Specifying the Keyboard Tone Split, Point, Assigning Different Tones to the Left and Right Sides of the Keyboard

■ Built-in Bass Tones

Your digital piano comes with two built-in bass tones.

• Pressing the SPLIT button in step 2 of the above procedure

1 While holding down the CONTROL button, use

selects “ACOUSTIC BASS” for the lower range of the

keyboard.

the keyboard keys shown below to adjust the

• Holding down the CONTROL button as you press the SPLIT

volume of the layered tones.

button in step 2 of the above procedure selects “RIDE ACO

BASS” for the lower range of the keyboard.

1 While holding down the SPLIT button, press the

keyboard key where you want the left limit of the

high range (right) tone to be.

Left limit of the high range

+ : Raises the volume

SPLIT

Low range

High range

– : Lowers the volume

You can assign different tones to keys on the left side and the right side of the keyboard.

Split point	* A note does not sound when you press a keyboard
	key at this time.
STRINGS	GRAND PIANO 2

1Press the keyboard key that corresponds to the tone you want to assign to the right side of the keyboard.

Example: GRAND PIANO 2

2Press the SPLIT button.

• This causes the SPLIT indicator lamp to light.

3Press the keyboard key that corresponds to the tone you want to assign to the left side of the keyboard.

• The keyboard is now split between the two tones. Example: STRINGS

4After you are finished using the split keyboard, press the SPLIT button again to unsplit it.

• This causes the SPLIT indicator lamp to go out.

E-12	420A-E-016A