Using the Pedals

The AP-31 is equipped with the two pedals shown in the illustration below. The left pedal normally functions as a soft pedal.

Damper pedal

Soft/Sostenuto pedal

The AP-33 comes equipped with the three pedals shown in the illustration below.

Soft pedal

Damper pedal

Sostenuto pedal

Pedal functions

Damper pedal

Pressing this pedal causes notes to reverberate and to sus- tain longer.

Soft pedal

Pressing this pedal dampens notes and slightly reduces their volume. Only notes played after the pedal is depressed are affected, and any notes played before the pedal is pressed sound at their normal volume.

Sostenuto pedal

Like the damper pedal, this pedal causes notes to reverber- ate and to sustain longer. The difference between the two pedals is the timing when they are pressed. With the soste- nuto pedal, you press the pedal after depressing the notes you want to sustain. Only the notes whose keyboard keys are depressed when the sostenuto pedal is pressed are af- fected.

E-14

To assign the sostenuto to the left pedal (AP-31 only)

While holding down the left pedal, turn on CELVIANO pow- er. To return left pedal to soft pedal, turn power off and then back on again.

NOTE

The following shows how pedal effects are applied during dif- ferent types of operations.

Memory playback, demo tune play

................... Pedal effects applied to notes played on the key- board only.

427B-E-018B

AP31/33_E_10_15.p65

Page 14

03.10.7, 11:00 AM Adobe PageMaker 6.5J/PPC