Manuals / Brands / Household Appliance / Air Conditioner / Casio / Household Appliance / Air Conditioner

Casio AP-31, AP-31V, AP-33, AP-33V Program Change, Pitch Bend Change ★, Channel Mode Message, All Sound Off ★, Reset All Controller ★

1 50

Download 50 pages, 1.99 Mb

Pitch Bend Sensitivity ★

RPN MSB = 00H

RPN LSB = 00H

Data Entry MSB = mmH

mm.. Pitch Bend Sensitivity = 00H to 18H (0 to 24 semi- tones)

Recognition

The data entry LSB is always ignored.

Master Fine Tuning

RPN MSB = 00H

RPN LSB = 01H

Data Entry MSB = mmH

Data Entry LSB = llH

mmll .... Master Fine Tuning = 00 00H to 40H 00H to 7FH 7FH (-100 to 0 to +99.99 cents)

Master Coarse Tuning

RPN MSB = 00H

RPN LSB = 02H

Data Entry MSB = mmH

mm.. Master Coarse Tuning = 28H to 40H to 58H (-24 to 0 to +24 semitones)

Recognition

The data entry LSB is always ignored.

RPN Null

RPN MSB = 7FH

RPN LSB = 7FH

Recognition

Once an RPN Null is sent, all received data entry MSBs and LSBs are ignored until another RPN message other than RPN Null or an NRPN message is received.

Program Change

Format

Byte 1	Byte 2
CnH	ppH

pp .... Program Number = 00H to 7FH

Send

Program Change messages are sent when you select a tone on the instrument.

Pitch Bend Change ★

Format

Byte 1	Byte 2	Byte 3
EnH	llH	mmH

n ....... Voice Channel Number = 0H to FH (Ch1 to Ch16)

ll....... Pitch Bend Change LSB = 00H to 7FH

mm.. Pitch Bend Change MSB = 00H to 7FH

Recognition

•The value llH mmH is 00H 00H at the lowest pitch, 00H 40H at mid-pitch, and 7FH 7FH at the highest pitch.

•You have to set both the LSB and MSB together to form a 14-bit value and make a Pitch Bend Change message recognized by the instrument.

Channel Mode Message

All Sound Off ★

Format

Byte 1	Byte 2	Byte 3
BnH	78H	00H

n ....... Voice Channel Number = 0H to FH (Ch1 to Ch16)

Recognition

Receipt of this message immediately mutes all tones playing over the MIDI channels.

Reset All Controller ★

Format

Byte 1	Byte 2	Byte 3
BnH	79H	00H

n ....... Voice Channel Number = 0H to FH (Ch1 to Ch16)

Recognition

Receipt of the Reset All Controller message causes the following controllers to be reset.

Controller Name	Reset Value
Modulation Wheel	vvH = 00H
Expression Controller	vvH = 7FH
Hold 1	vvH = 00H
Portamento	vvH = 00H
Sostenuto	vvH = 00H
Soft	vvH = 00H
NRPN	msb = 7FH, lsb = 7FH
RPN	msb = 7FH, lsb = 7FH
Pitch Bend Change	llH mmH = 00H 40H

A-6	427B-E-070B

AP31/33_E_MIDI Data.p65

Page 6

03.10.7, 11:00 AM Adobe PageMaker 6.5J/PPC

Contents

USER’S GUIDE GUÍA DEL USUARIO Page “INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK OR INJURY TO PERSONS” Page Introduction Safety Precautions Power Cord Do not locate the piano on an unstable sur- face Never climb onto the piano or stand. Never climb onto the piano Never dispose of the piano by burning it. Never dispose of the piano by burn Do not place containers containing water or other liquids on the instrument Do not expose this piano to rain or mois- ture Never try to take the piano apart or modify it Avoid dropping the piano and other strong impact Do not put plastic bags over your head or in your mouth Opening and closing the keyboard cover Make sure that the keyboard cover Power Plug Moving the piano Cleaning Connector Location Do not place heave objects on the piano. Never place heavy objects on top of Volume setting Operational Precautions Locating the Unit Care of the Unit Lithium Battery Main Features Contents IMPORTANT SAFETY INSTRUCTIONS Operational Precautions General Guide General Guide Connecting Headphones Front Bottom Back Panel Basic Operation Using Tones Selecting a Tone Using Digital Effects More about tones Using the Pedals Using the Metronome Using the Metronome Adjusting the Metronome Volume Using the Memory About the Memory Memory Capacity Recorded Data Recorded Data Storage Playback Deleting Memory Contents Using Demo Tunes Keyboard Settings Using Touch Select Using Transpose Adjusting the Tuning of the Piano MIDI What is MIDI What you can do with MIDI Send Receive Setting the Keyboard Channel Assigning Tones to Individual Channels Sending Memory Playback Data Program Change Number Settings General MIDI Turning Local Control On and Off MIDI Data Notes Keyboard Data (Note On, Note Off, Note Number, Velocity) Tone Change Data (Program Change) Pedal and Effect Operation Data (Control Troubleshooting Assembly Instructions 1Assembling the stand 2Installing the Keyboard onto the Stand 3Connecting the Pedal 4Connecting to a Power Supply Attachment of the Score Stand Specifications Appendix/Apéndice Initial Power On Settings Ajustes iniciales al activarse la alimentación MIDI Data Format Channel Messages Note Messages Control Change Channel Volume ★ Pan ★ Expression Controller ★ Hold 1 (Damper Pedal) Portamento ★ Brightness ★ Portamento Control ★ Effect 1 Depth (Reverb Send Level) Effect 3 Depth (Chorus Send Level) NRPN (Non-RegisteredParameter Numbers) ★ RPN (Registered Parameter Numbers) Program Change Pitch Bend Change ★ Channel Mode Message System Messages Universal System Exclusive Message Formato de datos MIDI Mensajes de canales Mensajes de nota Cambio de control Volumen de canal ★ Efecto panorámico ★ Controlador de expresión ★ Retención 1 (Pedal amortiguador) Suave Brillo ★ Control de portamento ★ Profundidad de efecto 1 (Nivel de envío de re- verberación) Profundidad de efecto 3 (Nivel de envío de coro) NRPN (Números de parámetros sin registrar) ★ RPN (Números de parámetros registrados) Cambio de programa Cambio de inflexión de altura tonal ★ Mensaje de modo de canal Mensajes de sistema Mensaje exclusivo de sistema universal Remarks Recognized Transmitted Function