Casio CLASSPAD330PLUS dot, ldot, uFreq, uMark, cross, square, assigned), data value, To do this:, list1 — list6, Mark Name Mark, Select this option:, (or a list name you

7-3-4

Before Trying to Draw a Statistical Graph

uFreq

Tap the down arrow button, and then select the frequency setting from the list that appears.

To do this:	Select this option:
Plot each data value once	1
Specify a list whose values indicate the frequency of each	list1 — list6
	(or a list name you
data value	assigned)

•The initial default frequency setting is 1. Specifying a list that causes each data value to be plotted five times helps to improve the appearance of scatter plots.

•A list of frequency values can contain non-zero integers and decimal values. In the case of a MedBox, or MedMed graph, however, a frequency list can contain positive integers only. Non-integer values (such as those with a decimal part) cause an error during statistical calculations.

uMark

Tap the down arrow button, and select the shape you want to use for the plot points of a scatter diagram (Scatter), xy line graph (xyLine), or normal probability plot (NPPlot).

Mark Name Marksquarecrossldotdot

Tip

• The default graph setting for all nine StatGraph setups is a scatter plot (Scatter).

20060301