Casio CLASSPAD330PLUS uClassPad Operation, uUsing the Shift Mode with a Cursor Key, Example :

16-11-2

Assigning Shift Mode Key Operations to Hard Keys

•To assign the Cut, Copy, Paste, or Undo/Redo operation, tap the applicable button on the dialog box.

• To clear the current assignment from the hard key, tap [Clear Assignment].

(6)After all the settings are the way you want, tap [OK] to apply them and close the Shift Key Assign dialog box.

Example : To configure a shift operation that inserts the variable assignment character “v” automatically when zand =key are pressed.

uClassPad Operation

(1)Perform steps (1) through (3) of the above operation to enable shift key assignment.

(2)Tap the down arrow button and select [=].

(3) k9V

(4)Tap inside the box next to the [Set] button. Tap [in the soft keyboard.

(5)Tap the [OK] button.

•Now When you press zand then =, the “v” will appear.

uUsing the Shift Mode with a Cursor Key

When the shift function of the zkey is enabled, you can use it with cursor key.

•Shift f: Moves the cursor to the beginning of the current line

•Shift c: Moves the cursor to the end of the current line

•Shift d or e: Select the expression in the current line to the right or left of the cursor

20110401