1.Make sure that the Handheld Terminal is turned off. If the power is on, press the power key to turn it off.
2.Turn the terminal over, turn the left and right lock switches for the battery pack cover to the “FREE” position (
), and then remove the battery pack cover (
).
3. Remove the battery pack by pulling up the removal tape as shown in the illustration.
Important!
•When removing the battery pack, make sure you do not leave the Handheld Terminal without a battery pack for more than about 10 minutes. Doing so can cause data in the memory to be deleted.
•When removing the battery pack, be sure you carefully follow the proper procedure as explained in this guide.
•Never try to use other type of battery than the ones that are specified for this product.
•When removing the battery pack, pull the removal tape straight up and remove the battery pack. Removing with excessive force can damage the battery pack.
•Before starting to use the Handheld Terminal, ensure that the battery pack cover is properly closed. If not, the power is not turned on or is turned off abruptly while it is in use.
•When the hand belt is attached to the terminal, loosen the hand belt before opening or closing the battery pack cover. Pulling with excessive force could damage the hand belt or hand belt mount.