
1.While holding down the Fn key and CLR key, push down the reset switch for about 3 seconds with the pen (stylus) until the message shown below appears on the display.
• To cancel the full reset operation, press the L Trigger key.
R Trigger Key
2.Press the R Trigger key. This causes the message shown below to appear.
• To cancel the full reset operation, press the L Trigger key.
R Trigger Key
3. Press the R Trigger key again to perform the full reset.
•The full reset starts and all data in the memory are erased, and the
Data stored in the Flashdisk folder remain unaffected.