1

USB Client Port

This port is used to transmit system data and file data (download,

 

 

upload) by connecting the Ethernet Cradle to a PC using a USB

 

 

cable (DT-380USB-A). The dedicated driver must be installed in

 

 

the PC before connecting the Ethernet Cradle to the PC.

2

USB Host Port

This port is used to connect a corresponding USB peripheral

 

 

device.

3

LAN Connection

This LED shows the status of the LAN connection.

 

Status LED

Off: LAN cable not connected correctly.

 

 

Lit orange: LAN cable connected correctly.

4

LAN

This LED shows the LAN operation status.

 

Communication

Off: No communication.

 

Status LED

Blinking: Communication in progress.

5

LAN Port

This port is used for connecting the cradle to a PC or hub via a

 

 

LAN cable so that system data and file data can be transmitted

 

 

(uploaded or downloaded).

 

 

The special driver software must be installed in the DT-X8.

6

AC Adaptor Jack

Connect the AC adaptor (sold separately) here.

7

Power Switch

Turns the power on and off.

 

 

 

8

Selector Switch

This switch is used to switch between a USB connection and a

 

 

LAN connection.

 

 

LAN: LAN

 

 

A: USB host

 

 

B: USB client

9

Power Supply/Data

Power is supplied to the DT-X8 via these contacts.

 

Communication

 

 

Terminals

 

10

Terminal Detect

This switch detects when the DT-X8 is seated correctly on the

 

Switch

Ethernet Cradle.

11

Mount Hooks

These hooks are used to stabilize the Handheld Terminal when

 

 

mounting it on the cradle.

12

Power Indicator

This LED indicates the power status and the mounting status of

 

LED

the DT-X8.

 

 

Off: DT-X8 is not installed.

 

 

Green: Power on, DT-X8 mounted correctly.

E-51