Mount and use the USB and Charging Unit as described in the procedure below.

Mounting the USB and Charging Unit

1.Fit the USB and Charging Unit onto the bottom of the terminal as shown in the illustration.

2.After mounting the unit onto the terminal, check that it is firmly locked in place using the stoppers.

Stoppers

Important!

The USB and Charging Unit can only be mounted on the terminal in one direction. Do not use excessive force to attempt to push the terminal into the unit when it is facing the wrong way.

Water or other liquids on the power supply/data communication terminals on the USB and Charging Unit or terminal can lead to an electric shock or fire. Note also that soiling on the terminals will impair the connection, leading to reduced charging functionality. As a safety precaution, disconnect the AC adaptor and USB cable before cleaning the power supply terminals with a dry cloth or cotton bud.

If there is condensation or other moisture on the terminal, wipe it off thoroughly with a dry cloth.

Never short-circuit the power supply/data communication terminals on the USB and Charging Unit or terminal as this could cause a fault.

When mounting the USB and Charging Unit on the DT-X8, attach the hand strap to the top of the terminal.

E-64