The first time you load a battery into the camera, a screen appears for configuring the display language, date, and time settings. Failure to set the date and time correctly will cause the wrong date and time data to be recorded with images.
IMPORTANT!
•A screen for language selection will not appear in step 2 of the procedure below if you purchased a camera intended for the Japanese market. To change the display language from Japanese in this case, use the procedure under “Specifying the Display Language (Language)” (page 144). Note that a version of this manual in the language you select may not be included with a camera intended for the Japanese market.
1. Press [ON/OFF] (Power) to turn on the | [BS] |
[ON/OFF] (Power) | |
camera. |
|
2. Use [8], [2], [4], and [6] to select the language you want and then press [SET].
3.Use [8] and [2] to select a date style and then press [SET].
Example: July 10, 2012 YY/MM/DD * 12/7/10 DD/MM/YY * 10/7/12 MM/DD/YY * 7/10/12
4.Set the date and the time.
Use [4] and [6] to select the setting you want to change and then use [8] and [2] to change it.
To switch between
5.After setting the date and time, use [4] and [6] to select “Apply” and then press [SET].
19 | Quick Start Basics |
|