Selecting “On” causes the front lamp to turn on for illumination | Front lamp |
when shooting under low lighting conditions. |
|
1. In the REC mode, press [SET].
2.Use [8] and [2] to select the third Control Panel option from the bottom (REC Light).
3.Use [4] and [6] to select “On” and then press [SET].
•y (REC Light) is displayed on the control panel while the REC Light is enabled.
IMPORTANT!
•Never look directly into the front lamp while it is lit.
•Never aim the front lamp at a person who is operating a motor vehicle, etc.
•The effectiveness of the REC Light is reduced in the case of faraway subjects.
Using Face Detection (Face Detection)When shooting people, the face detection feature detects the faces of up to ten individuals and adjusts focus and brightness accordingly.
1.In the REC mode, use [4] and [6] to display G in the control panel, which enters the Face Detection.
•If G does not appear in the control panel, press [4] or [6] many times until it appears. Each press of [4] or [6] will cycle the control panel option in the following sequence: Face Detection *
2.Press [SET] and then use [8] and [2] to select the second Control
Panel option from the bottom (Face Detection).
3.Use [4] and [6] to select “G Face Detection: On” and then press [SET].
46 | Snapshot Tutorial |
|