Move the subject away from the wall to avoid shadows!
The camera may mistake shadows on the wall or floor caused by strong sunlight, illumination, or other light sources as part of the subject. Shadows tend to form when the subject is too close to a wall. Have the subject move as far away as possible from the wall.
Do not use a moving background!
Good cropping is not possible if anything besides the subject is moving in the images. For example, avoid breaking waves, trees blowing in the wind, etc.
Specifying the Subject Type and CS SpeedYou can select from among the four subject types listed below. You also can specify a stationary subject (one frame only) in addition to a moving subject.
Perform the following procedure when you want to change the subject type.
1.Before shooting the subject in step 3 under “Step 1: Shoot the subject.” (page 6), press [SET].
2.Select “Subject Type” and then press [SET].
3.Use [8] and [2] to select the subject type you want and then press [SET].
10Creating a Dynamic Photo Image