If you make a mistake configuring display language, date, or time settings with the above procedure, refer to the following pages for information about how to correct the settings.

Display language: Page 97

Date and time: Page 96

NOTE

Each country controls its local time offset and the use of summer time, and so they are subject to change.

Removing the battery from the camera too soon after configuring time and date settings for the first time can cause the settings to be reset to their factory defaults. Do not remove the battery for at least 24 hours after configuring settings.

Preparing a Memory Card

Though the camera has built-in memory that can be used to store images and movies, you probably will want to purchase a commercially available memory card for greater capacity. The camera does not come with a memory card. Images recorded while a memory card is loaded are saved to the memory card. When no memory card is loaded, images are saved to built-in memory.

• For information about memory card capacities, see page 122.

Supported Memory Cards

– SD Memory Card (Up to 2GB)

– SDHC Memory Card (2GB to 32GB)

– SDXC Memory Card (32GB to 2TB) Use one of the above types of memory card.

The above are supported memory card types as of June 2012.

Noted memory card capacities are standard values.

Use only SD cards that are compliant with the SD Card Association specification.

This camera supports use of Eye-Fi cards.

19

Quick Start Basics