To focus with manual focus

1. On the monitor screen, compose the image so the subject you want to focus on is within the yellow boundary.

2. Watching the image on the monitor screen use

 

[4] and [6] to adjust focus.

 

• At this time the image that is within the boundary

 

will enlarge and fill the monitor screen, which aids

Yellow boundary

in focusing. If you do not perform any operation for

 

two seconds while the enlarged image is displayed, the screen in step 1 will re-appear.

NOTE

•An Auto Macro feature detects how far the subject is from the lens and automatically selects either Macro Focus or Auto Focus accordingly.

•Auto Macro can be used when recording snapshots only.

•Use of the flash together with Macro Focus can cause the light of the flash to become blocked, which may result in unwanted lens shadows in your image.

•Whenever you perform an optical zoom operation while shooting with Auto Focus, Macro Focus, or Manual Focus, a value will appear on the monitor screen to tell you the focus range, as shown below.

Example: oo* cm to 9

*oo is the actual focusing range value.

•The operations assigned to the [4] and [6] keys with the “L/R Key” setting (page 59) are disabled while Manual Focus is selected as the focus mode.

Using Focus Lock

“Focus lock” is a technique you can use when you want to compose an image in which the subject you want to focus on is not within the focus frame in the center of the screen.

•To use focus lock, select “U Spot” for the Auto Focus area (page 55).

1.Align the monitor screen’s focus frame with the subject you want to focus on and then half-press the shutter button.

Subject to

be focused on

Focus frame

53

Advanced Settings