.If the image does not focus...

If the focus frame stays red and the back lamp is flashing green, it means that the image is not in focus (because the subject is too close, etc.). Re-point the camera at the subject and try to focus again.

.Shooting with AutoIf the subject is not in the center of the frame...

“Focus lock” (page 53) is the name of a technique you can use when you want to shoot an image in which the subject to be focused on is not within the focus frame in the center of the screen.

To track the movement of a moving subject

Half-press the shutter button to follow and focus automatically on a moving subject. See “O Tracking” (page 55) for more information.

.Shooting with Premium Auto

•In addition to shutter speed, aperture, and ISO sensitivity, the camera automatically executes the following operation as required when shooting with Premium Auto.

–Auto Focus is normally performed until you half-press the shutter button.

–Make-up (page 38)

Under the initial default camera setup when you purchase it, selecting Premium Auto as the auto recording mode (page 24) turns on the Make-up function.

•Shooting with Premium Auto can cause vibration and noise to occur due to lens operation. This does not indicate malfunction.

•When Shooting with Premium Auto, the message “Processing Premium Auto.” may appear on the monitor screen. If you feel the camera is taking too long to process data, try shooting with standard Auto instead.

•In some cases, Premium Auto may not be able to interpret the shooting environment correctly. If this happens, shoot with standard Auto.

27

Quick Start Basics