Adding Audio to a Snapshot (Dubbing)

Procedure

[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Dubbing

You can add audio to a snapshot after you shoot it. You can re-record a snapshot’s audio whenever you want. You can record up to about 30 seconds of audio for a single snapshot.

1.Press the shutter button to start audio recording.

Remaining recording time

2.Press the shutter button again to stop audio recording.

• Take care that you do not block the camera’s microphone with your fingers while recording.

•Good recording results are not possible when the camera is too far away from what you are trying to record.

•Your camera supports the following audio data formats.

 

– Audio Format: WAVE/IMA-ADPCM (WAV extension)

Microphone

•

Adding audio (dubbing) is not possible for the following

 

 

types of images.

 

 

– Images created using MOTION PRINT

 

 

– Protected images

 

•

To delete audio, perform the following operation:

 

 

Dubbing * Delete * [SET] * [MENU].

 

IMPORTANT!

•Note that you cannot restore the original audio of an Audio Snapshot after you delete or re-record it.

111Other Playback Functions (PLAY)