.To change Auto Shutter trigger sensitivity (Sensitivity)
1.Use [8] and [2] to select “Sensitivity” and then press [6].
2.Use [4] and [6] to select the sensitivity setting you want, and then press [SET].
•You can select any one of three sensitivity levels, from ø (Lowest) to œ (Highest).
•With the œ (Highest) setting, the auto shutter release is triggered relatively easily. Auto shutter release triggering becomes more difficult with the ø (Lowest) setting, but recorded images have the least blur. Experiment with Auto Shutter trigger sensitivity settings to find the one that work best for you.
.Using Auto Shutter in Combination with Continuous Shutter
The following describes how Auto Shutter works while used in combination with Continuous Shutter (page 40).
With CS: Normal | The camera will go back into Auto Shutter standby and be | |
Speed CS, | ||
ready to shoot again each time it is triggered. To stop an | ||
CS: 4fps, and | ||
ongoing Continuous Shutter operation, press [SET]. | ||
CS: 10fps | ||
| ||
With CS: Flash | 3 continuous shutter images will be shot with flash when Auto | |
Shutter is triggered. | ||
| ||
|
|
73 | Advanced Settings |
|