Problem

Possible Cause and Recommended Action

 

 

A recorded image

1)Camera power may have been turned off before the save

 

was not saved.

operation was complete, which will result in the image not

 

 

being saved. If the battery indicator shows

, charge the

 

 

battery as soon as possible (page 18).

 

 

 

2)You may have removed the memory card from the camera

 

 

before the save operation was complete, which will result in

 

 

the image not being saved. Do not remove the memory card

 

 

before the save operation is complete.

 

 

 

 

 

Though available

Not enough light is reaching the subjects. Change the flash

 

lighting is bright,

mode setting to < (Flash On) for daylight synchro flash (page

 

the faces of people

36), or adjust EV shift to the + side (page 46).

 

 

in the image are

 

 

 

dark.

 

 

 

 

 

 

Night shots come

Use the following BEST SHOT scenes (page 55) when shooting

 

out bad.

at night.

 

 

 

• Night Scene (for shooting night scenery only)

 

 

 

• Night Scene Portrait (for shooting people against night

 

 

scenery)

 

 

 

 

 

Subjects are too

Sunlight reflected by water, sand, or snow, can cause

 

dark when shooting

underexposure of images. Change the flash mode setting to <

 

images in a

(Flash On) for daylight synchro flash (page 36), or adjust EV

 

seashore or ski

shift to the + side (page 46).

 

 

area.

 

 

 

 

 

 

The focus frame

Normally, turning off the camera while “Detect Smile” is

 

does not appear on

selected for Auto Shutter will cause the camera’s face detection

 

the monitor screen.

setting to change. You will need to change the face detection

 

 

setting again after turn on the camera. You can tell the camera

 

 

to remember the Auto Shutter setting by selecting “On” for the

 

 

“Auto Shutter” power on default setting (page 81).

 

 

 

 

 

Digital zoom

1)The digital zoom setting may be turned off. Turn on digital

 

(including HD

zoom (page 78).

 

 

zoom) does not

2)Date stamping may be turned on, which will cause digital

 

work. The zoom

zoom to be disabled. Turn off date stamping (page 156).

 

bar indicates zoom

3)Digital zoom is disabled when some BEST SHOT scenes

 

only up to a zoom

(Business cards and documents, White board, etc.) are

 

factor of 4.0.

selected. Select another scene (page 55).

 

 

 

 

 

182

Appendix