APPENDIX
| Symptom | Possible Cause | Action |
|
|
|
|
| Color of the playback | Sunlight or light from another source is shining | Position the camera so sunlight does not shine |
| image is different from the | directly into the lens during recording. | directly into the lens. |
Playback | image on the monitor |
|
|
screen during recording. |
|
| |
|
|
| |
|
|
|
|
| Images are not displayed. | A memory card with | This camera cannot display |
|
| with another camera is loaded in the camera. | recorded onto a memory card using another digital |
|
|
| camera. |
|
|
|
|
| All buttons and switches | Circuit problem caused by electrostatic charge, | Remove the battery from the camera, reinsert it, |
| are disabled. | impact, etc. while the camera was connected to | and then try again. |
|
| another device. |
|
|
|
|
|
| Monitor screen is off. | USB communication is in progress. | After confirming that the computer is not |
Other |
|
| accessing camera memory, disconnect the USB |
|
| cable. | |
|
|
| |
|
|
|
|
| Cannot transfer files over a | 1) Camera is not set securely on the USB cradle. | 1) Check the connection between the camera and |
| USB connection. |
| USB cradle. |
|
| 2) USB cable is not connected securely. | 2) Check all connections. |
|
| 3) USB driver is not installed. | 3) Install the USB driver on your computer (page |
|
|
| 180). |
|
| 4) Camera is turned off. | 4) Press the [USB] button on the USB cradle. |
|
|
|
|
226