OTHER RECORDING FUNCTIONS
Creating Your Own BEST SHOT Setup
You can use the procedure below to save the setup of an snapshot or movie you recorded as a BEST SHOT scene. After that, you can recall the setup whenever you want to use it.
1.In the REC mode, press [BS] (BEST SHOT).
2.Use [], [], [], and [] to select “Register
User Scene”, and then press [SET].
3.Use [] and [] to display the snapshots or movies whose setup you want to register as a BEST SHOT scene.
4.Use [] and [] to select “Save”, and then press [SET].
•This registers the setup. Now you can use the procedure on page 85 to select your user setup for recording.
IMPORTANT! 
•BEST SHOT user setups are located in the camera’s
•Registering a snapshot creates a snapshot setup, while registering a movie creates a movie setup. A snapshot setup can be used to record snapshots only, and a movie setup can be used to record movies only.
•Selecting a user snapshot setup displays the indicator “SU” in the upper right corner of the monitor screen, followed by a number (that indicates the setup number). Selecting a movie snapshot setup displays the indicator “MU” in the upper right corner of the monitor screen, followed by a number (that indicates the setup number).
•Note that formatting
| 88 |
| B |
|
|
|
|