OTHER RECORDING FUNCTIONS
7.Point the camera at the subject and then press [
] (MOVIE).
•This will record a movie of the length specified by the time values you specified in steps 3 and 4. Recording stops automatically.
•To stop recording part way through, press [
] (MOVIE) again.
IMPORTANT! 
•Note that Short Movie data is continually recorded
and stored in a buffer before you press [
] (MOVIE). Be sure to keep the camera still and
pointed in the direction of the subject for some time before you press [
] (MOVIE) to start recording.
•When a Short Movie record operation starts future part recording, the monitor screen will show a countdown of the remaining recording time. Recording continues until the end of the countdown is reached.
Recording a Past Movie
Past Movie uses a 
] (MOVIE) starts recording from five seconds prior to the point [
] (MOVIE) is pressed. Use Past Movie when you want to make sure you do not miss
Operation ➝ | Press [ | ] MOVIE | Press [ | ] MOVIE |
|
|
| ||
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| |
|
|
| Record |
| Store |
|
|
| |
|
|
|
|
|
|
|
|
|
|
Action ➝ Stores the | Recording |
| Recording | Storage | |||||
previous | of the future |
| ends. | complete. | |||||
5 seconds. | part starts. |
|
|
|
|
|
| ||
1.In the REC mode, press [BS] (BEST SHOT).
2.Use [], [], [] and [] to select the “Past
Movie” scene, and then press [SET].
•Selecting the “Past Movie” scene causes “
” to appear on the monitor screen.
99