Configuring Camera Sound Settings (Sounds)
Procedure
MENU * Setup * Sounds
Startup |
| ||
Half Shutter | Toggles the operation tone between on and off. | ||
Shutter | |||
| |||
Operation |
| ||
| Operation | Specifies the sound volume. This volume setting is also | |
| Vol | used during video output (from the HDMI port) (page 74). | |
Volume | Playback | Specifies the volume of movie audio output. This volume | |
| setting is also used during video output (from the HDMI | ||
| Vol | ||
| port) (page 74). | ||
|
| ||
|
|
| |
• Setting a volume level of 0 mutes output.
Time Stamping Snapshots (Timestamp)
Procedure
MENU * Setup * Timestamp
You can configure the camera to stamp the recording date only, or date and time in the lower right corner of each snapshot.
•Once date and time information is stamped into a snapshot, it cannot be edited or deleted.
Example: July 10, 2015, 1:25 p.m.
Date | 2015/7/10 |
Date & Time | 2015/7/10 1:25pm |
Off | No stamping of date and/or time |
|
|
•Even if you do not stamp the date and/or time with Timestamp, you can do so later using some printing application.
•Stamping is performed in accordance with the date and time settings (page 106) and the display style settings (page 106).
104 | Other Settings (Set Up) |
|