First, charge the battery prior to use.
Note that the battery of a newly purchased camera is not charged. Perform the steps below to load the battery into the camera and charge it.
•Your camera requires a special CASIO rechargeable lithium ion battery
Loading the Battery
1.Open the cover.
While depressing the [BATT.OPEN] button, slide the cover in the direction indicated by the arrow in the illustration.
1
3
[BATT.OPEN] 2 button
2.Load the battery.
With the EXILIM logo on the battery upwards, load the battery into the camera as shown in the illustration.
Battery
NG
OK
EXILIM logo
3.Close the cover.
While holding down the [BATT.OPEN] button, align the tabs of the cover with the notches on the camera and then slide the cover in the direction of the arrow.
1
2
[BATT.OPEN] 3 button
19 | Quick Start Basics |
|