Configuring Wireless LAN Settings

Use the procedure below to establish a wireless LAN connection between the camera and a smartphone for the first time. This operation is required for the first connection only.

1.On your camera, enter the REC mode and then touch the “ ” (Remote Capture) icon.

•If the “ ” (Remote Capture) icon is not displayed on the screen, touch the tab to display

it.

This will enable connection with a smartphone and the camera will display a screen for input of an SSID and password.

2.For the smartphone Wi-Fi setting, input the camera SSID and password.

password

SSID

When the message “Start up the phone app.”

appears on the camera’s monitor screen, it means that the smartphone has established a wireless connection with the camera.

•To break the wireless connection, touch “Cancel”.

•What you need to do to establish a wireless LAN connection depends on the type of smartphone you are using. For details about how to establish a wireless LAN connection see the user documentation that comes with your smartphone.

Using a Smartphone as a Camera Remote Controller (Remote Capture)

This function lets you remotely shoot a snapshot or movie with the camera using a smartphone. You also can perform remote zoom, self-timer, and other operations as well.

1.On your camera, enter the REC mode and then touch the “ ” (Remote Capture) icon.

•If the “ ” (Remote Capture) icon is not displayed on the screen, touch the tab to display it.

2.On your smartphone, start up the EXILIM Remote app.

This will establish a connection between the smartphone and your camera.

•About 60 seconds after your camera establishes a connection with the smartphone, the camera’s monitor screen will go blank and its back lamp will light green.

•If the message “Connect your phone to the access point below.” remains on the camera’s monitor screen, change the smartphone’s Wi-Fi settings so your camera is selected for connection (page 86).

86Establishing a Wireless LAN Connection