2.Turn on the TV and select its video input
mode.
If the TV has more than one video input, select the one where the camera is connected.
3.Press [
] (PLAY) to turn on the camera and enter the PLAY mode.
When the camera turns on in the PLAY mode, an image will appear on the TV screen. The camera’s monitor screen will not turn on.
•Pressing [ON/OFF] or [ 
] (REC) will not turn on the camera.
4.Now you can perform the applicable operation on the camera for the type of file you want to play.
To turn off the camera
You can turn off the camera by pressing the camera’s [ON/OFF] button.
IMPORTANT!
•When connecting to a TV to display images, be sure to configure the camera’s [
] (REC) and [
] (PLAY) buttons for “Power On” or “Power On/Off” (page 201).
•All icons and indicators that appear on the monitor screen also appear on the TV screen.
You can use [S] (DISP) to change the display contents.
•Audio is monaural.
•Certain TVs may cut off part of the images.
•Audio is initially output by the camera at maximum volume. When you first start displaying images, set the TV volume control at a relatively low level and then adjust it as required.
154
VIEWING SNAPSHOTS AND MOVIES