2.Plug the battery charger into a household
power outlet.
This will cause the [CHARGE] lamp to turn red.
•It takes about 150 minutes to achieve a full charge. Actual charging time depends on current battery capacity, remaining power, and charging conditions.
[CHARGE] lamp
When charging is complete
The [CHARGE] lamp will go out. Unplug the power cord from the power outlet and then remove the battery from the charger.
If the [CHARGE] lamp does not light red
Charging cannot be performed because ambient temperature or temperature of the charger is too hot or too cold. Wait until the camera returns to normal temperature. When the camera returns to a temperature where charging can be performed, the [CHARGE] lamp will light red.
If the [CHARGE] lamp flashes red
The battery is faulty or the battery is loaded in the charger incorrectly. Remove the battery from the charger and check if its contacts are dirty. If they are, wipe them off with dry cloth and then reload the battery into the charger. When experiencing charging problems, also check to make sure that the power cord is not disconnected from the power outlet or charger.
If an error still continues to occur after you perform the above steps, it could mean that the battery is faulty. Contact your nearest CASIO authorized service center.
37
GETTING READY