Editing the Date and Time of an Image

Use the procedure in this section to change the date and time of a previously recorded image.

1.In the PLAY mode, use [W] and [X] to display the image whose date and time you want to edit.

2.Press [MENU].

3.On the “PLAY” tab, select “Date/Time” and then press [X].

4.Set the date and the time you want.

To do this:

Do this:

Change the value at the cursor

Press [S] or [T].

location

 

 

 

Move the cursor between settings

Press [W] or [X].

 

 

Toggle between 12-hour and 24-hour

Press [BS].

timekeeping

 

 

 

5.When all the settings are the way you want, press [SET] to apply them.

•After editing the time and date, display the image to confirm that the date and time are correct.

IMPORTANT!

•The date and time stamped into an image using the Time Stamp feature cannot be edited (page 135).

•You cannot edit the date and time of an image that is protected. Unprotect the image and then edit the date and time.

•You can specify any date in the range of January 1, 1980 to December 31, 2049.

165

EDITING IMAGES