NOTE
•You can use the camera to connect to a DVD recorder or video deck and record images from the camera. There are various different methods you can use in order to connect to another device when recording images. The following describes one method for connection using the AV cable that comes with the camera.
–DVD recorder or video deck: Connect to the VIDEO IN and AUDIO IN terminals.
–Camera: Connect to the USB/AV connector
You can play a slideshow of snapshots and movies on the camera and record it on a DVD or video tape. You can
■Selecting the Screen Aspect Ratio and Video Output System
You can use the procedure in this section to select either NTSC or PAL as the video output system. You can also specify an aspect ratio of 4:3 or 16:9.
1.Press [MENU].
2.On the “Set Up” tab, select “Video Out” and then press [X].
3.Use [S] and [T] to select the setting you want and then press [SET].
record movies by selecting “ 
Only” for the slideshow “Images” setting (page 149). When recording to DVD recorder or video deck, you can turn off display information
For this type of TV:
Select this video output system:
(page 56) so indicators and other information is not recorded along with the image.
To view the image that is being recorded, connect a TV or
Standard aspect ratio screen NTSC
NTSC 4:3
TV (Japan, U.S., and other countries)
Wide aspect ratio screen NTSC TV
other monitor to the DVD recorder or video deck that is connected to the camera. For information about connecting
(Japan, U.S., and other countries)
NTSC 16:9
Standard aspect ratio screen PAL TV
(Europe and other areas)
PAL 4:3
Wide aspect ratio screen PAL TV
a monitor to the DVD recorder or video deck and about how |
to record, see the user documentation that comes with the |
DVD recorder or video deck you are using. |
(Europe and other areas)
PAL 16:9
155
VIEWING SNAPSHOTS AND MOVIES