PRINTING IMAGES

1.Press [MENU].

2.Select the “Set Up” tab, select “USB”, and then press [].

3.Use [] and [] to select the setting you want, and then press [SET].

When connecting to this type of

Select this setting:

device:

 

 

 

Computer or USB DIRECT-

Mass Storage (USB

PRINT-compatible printer

DIRECT-PRINT)

 

 

PictBridge-compatible printer

PTP (PictBridge)

 

 

Mass Storage (USB DIRECT-PRINT) causes the camera to see the computer as an external storage device. Use this setting for normal transfer of images from the camera to a computer (using the bundled Photo Loader application).

PTP (PictBridge) simplifies the transfer of image data to the connected device.

4.Use the USB cable that comes with the camera to connect the USB cradle to a printer.

USB

Also, connect the AC adaptor to the USB cradle and plug the AC adaptor into an electrical outlet.

If you are using battery power without the AC adaptor, make sure that the battery is fully charged.

5.Set the camera on the USB cradle.

6.Turn on the printer.

7.Load paper for printing the images into the printer.

160