OTHER RECORDING FUNCTIONS

NOTE

•You can play back an audio file recorded in the Audio Snapshot mode on your computer using Windows Media Player.

Recording audio for a snapshot creates two separate files: one for the image data and one for the audio data. Each file is stored in a different folder in camera memory (page 177).

1.Press [] (REC), and then select “

(+)” as the recording mode (page 49).

•This enters the Audio Snapshot mode and causes “” to appear on the monitor screen.

•You can use the key customization feature (page

106) to configure the camera to enter the Audio Snapshot mode whenever you press [] or [] while in a REC mode.

2.Press the shutter button to record the image.

•After the image is recorded, the camera enters audio recording standby, with the image

you just recorded on the

Remaining recording time

monitor screen.

 

•You can cancel audio recording standby by pressing [MENU].

3.Press the shutter button to start audio recording.

•The operation lamp will flash green while recording is in progress.

•If you have the monitor screen turned off (page 27), the monitor screen turns on while you are adding audio to a snapshot.

4.Recording stops after about 30 seconds or when you press the shutter button.

IMPORTANT!

•You cannot use the Audio Snapshot mode in combination with triple self-timer.

96