VIEWING IMAGES ON A COMPUTER

13.Press the USB cradle’s [USB] button.

•This will cause the “Add New Hardware...” dialog box to appear on the computer screen as the computer automatically detects the camera’s file memory. After you install the USB driver, “Add New Hardware...” dialog box will no longer appear when you perform the above steps to establish a USB connection.

•Pressing the [USB] button enters the USB mode, which causes the USB cradle’s [USB] lamp to light green (page 201).

•At this point, some operating systems will display a “Removable Disk” dialog box. If your operating system does, close the dialog box.

[USB] button

[USB] lamp

14.On your computer, double-click “My Computer”.

•If you are running Windows XP, click [Start] and then [My Computer].

15.Double-click “Removable Disk”.

•Your computer sees the camera’s file memory as a removable disk.

16.Double-click the “Dcim” folder.

17.Double-click the folder that contains the image you want.

18.Double-click the file that contains the image you want to view.

•For information about file names, see “Memory Folder Structure” on page 177.

NOTE

•If you open a rotated image on your computer, the original unrotated version will appear (page 121). This is true both for a rotated image opened from camera memory and for a rotated image that has been copied to your computer’s hard disk.

169