BASIC IMAGE RECORDING

To turn digital zoom on and off

1.In a REC mode, press [MENU].

2.Use [￿] and [￿] to select the “REC” tab.

3.Use [￿] and [￿] to select “Digital Zoom”, and then press [￿].

4.Use [￿] and [￿] to select the setting you want, and then press [SET].

To do this:

Select this setting:

Turn on digital zoom

On

Turn off digital zoom

Off

Only the optical zoom range is displayed in the zoom level indicator when digital zoom is turned off.

Using the Flash

Perform the following steps to select the flash mode you want to use.

The approximate effective range of the flash is shown below.

Wide Angle: Approximately 0.4 to 2.6 meters (1.3´ to 8.5´) (ISO Sensitivity: Auto)

Telephoto : Approximately 0.4 to 2.0 meters (1.3´ to 6.6´) (ISO Sensitivity: Auto)

*Depends on zoom factor.

1.In a REC mode, press [￿] ().

Each press of [￿] () cycles through the flash mode settings described below on the monitor screen.

Flash mode indicator

[ ￿] ( )

 

59

 

B