OTHER RECORDING FUNCTIONS
Specifying Contrast
Use this procedure to adjust the relative difference between the light areas and dark areas of the image you are recording.
1.In the REC mode, press [MENU].
2.Select the “Quality” tab, select “Contrast”, and then press [].
3.Use [] and [] to select the setting you want, and then press [SET].
To get this: | Select this setting: | |
High contrast | +2 | |
|
|
|
|
| +1 |
|
| |
|
|
|
Normal contrast | 0 | |
|
|
|
|
| |
Low contrast | ||
|
|
|
Date Stamping Snapshots
You can have the snapshot’s recording date only, or date and time stamped in the lower right corner of the image.
1.In the REC mode, press [MENU].
2.Select the “Set Up” tab, select “Timestamp”, and then press [].
3.Use [] and [] to select the setting you want, and then press [SET].
Example: December 24, 2006, 1:25 p.m.
To include this date stamp information: | Select this setting: | |
|
| |
Recording date (2006/12/24) | Date | |
|
| |
Recording date and time | Date&Time | |
(2006/12/24 1:25pm) | ||
| ||
|
| |
Nothing | Off | |
|
|
•Turning on time stamping causes the applicable timestamp icon to appear on the monitor screen (page 26).
: Date
: Date&Time
124