VIEWING IMAGES ON A COMPUTER

12.Place the camera onto the USB cradle.

•Do not place the camera onto the USB cradle while it is turned on.

13.Press the USB cradle’s [USB] button.

•This will cause your computer to create a hardware profile for camera’s built-in memory or the memory card loaded in the camera. You do not need to install the USB driver every time. After you install it once, your computer will recognize the camera’s built-in memory or its memory card when you establish a USB connection between the camera and your computer.

•Pressing the [USB] button enters the USB mode, which causes the USB cradle’s [USB] lamp to light green (page 232).

•At this point, some operating systems will display a “Removable Disk” dialog box. If your operating system does, close the dialog box.

[USB] button

[USB] lamp

14.On your computer, double-click “My Computer”.

•If you are running Windows XP, click [Start] and then [My Computer].

196