PRINTING IMAGES
12.On the camera’s monitor screen, use [] and [] to select “Print”, and then press [SET].
•This starts printing and displays the message
“Busy.... Please wait...” on the monitor screen. The message will disappear after a short while, even though printing is still being performed. Pressing any of the camera’s buttons while printing is in progress will cause the message to reappear.
•The print menu will appear when printing is complete.
•If you selected “1 Image” in step 11, you can select another image for printing and then repeat this step to print.
13.After you are finished printing, press the USB cradle’s [USB] button, and then turn off the camera.
Date Printing
Any one of the procedures described below can be used to include the recording date in image prints. Correct date printing requires that the current date be set on the camera before the image is recorded.
•Before recording the image, turn on date stamping (“Date” or “Date&Time”) (page 124).
•Specifying date printing with DPOF settings (page 182)
—If you use the DPOF setting to turn on date stamping for printing on an image that already has date/time stamp data embedded in it (page 124), the two stamps will be superimposed. Because of this, do not turn on DPOF date stamping if an image already has a date/time stamp embedded on it.
—Some printers may have settings that disable time stamp and/or DPOF printing. See the user documentation that comes with your printer for details about how to enable these features.
—Note that some professional print services do not support DPOF printing. Check with your service before ordering prints.
189