OTHER RECORDING FUNCTIONS

3. Use [￿] and [￿] to

select “Normal

Speed”, “High Speed” or “Flash Cont.”, and then press [SET].

•This causes the applicable icon to appear on the monitor screen.

: Normal-speed Continuous Shutter

: High-speed Continuous Shutter

: Flash Continuous Shutter

•With “Off”, snapshots are recorded one at a time.

IMPORTANT!

•Turning off the camera automatically turns off the Continuous Shutter Mode.

Normal-speed continuous shutter

Holding down the shutter button continuously records images, as long as there is memory available to store them. Release the shutter button to stop recording.

•You can select the flash mode you want with normal- speed continuous shutter (page 63).

•The speed of continuous shutter recording depends on the type of memory card loaded in the camera. When recording to built-in memory, continuous shutter recording is relatively slow.

High-speed continuous shutter

Holding down the shutter button while high-speed continuous shutter is selected records up to three images at high speed. Shooting stops if you release the shutter button before three images are recorded.

•Flash is turned off automatically.

•Note that the resolution of images recorded with high- speed continuous shutter is somewhat lower resolution and more prone to digital noise than images recorded with normal-speed continuous shutter.

•“Auto” ISO sensitivity always is used for high-speed continuous shutter, regardless of the current ISO sensitivity setting.

88