3.Use [8] and [2] to select a date style and then press [SET]. Example: July 10, 2012

YY/MM/DD * 12/7/10 DD/MM/YY * 10/7/12 MM/DD/YY * 7/10/12

4.Set the date and the time.

Use [4] and [6] to select the setting you want to change and then use [8] and [2] to change it.

To switch between 12-hour and 24-hour format, press [0] (Movie).

5.After setting the date and time, use [4] and [6] to select “Apply” and then press [SET].

If you make a mistake configuring display language, date, or time settings with the above procedure, refer to the following pages for information about how to correct the settings.

–Display language: page 163

–Date and time: page 162

NOTE

•Each country controls its local time offset and the use of summer time, and so they are subject to change.

•Removing the battery from the camera too soon after configuring time and date settings for the first time can cause the settings to be reset to their factory defaults. Do not remove the battery for at least 24 hours after configuring settings.

23

Quick Start Basics