To replace the battery |
|
1. Open the battery cover and remove | Stopper |
the current battery. |
|
With the monitor screen side of the camera facing upwards, slide the stopper in the direction indicated by the arrow in the illustration. After the battery pops out, pull it the rest of the way out of the camera.
2.Load a new battery.
Charge the Battery
You can use either of the two following methods to charge the camera’s battery.
•
•USB connection to a computer
.To charge with the
1.Turn off the camera.
Check to make sure that the camera’s monitor screen is blank. If it isn’t, press [ON/OFF] (Power) to turn off the camera.
[ON/OFF] (Power)
2.After connecting the supplied USB cable to the
USB cable (included with camera)
Large connector
USB | USB port |
|
Power cord 
14 | Quick Start Basics |
|